Series 50 Flooring 

This is a Methyl Methacrylate system, which is a fast curing, UV stable system.  The system can be installed in temperatures as low as -20°F, and is a solid color system, with opaque aggregate broadcast into the base coats.  Our base system is a standard, double broadcast, 60-80 mils ( nominal 1/8 inch ) thick.

The preparation recommended for this system is shotblasting.   This is a mechanical method of preparing the concrete to receive high performance epoxy systems.  This removes the laitance (the weak part of the concrete) and allows the epoxy to bond to the concrete.

Installation takes approximately one day, in most circumstances.  With this system you are able to use the floor an hour after the installation is complete. 

Series 50Q Quartz Flooring

This is a Methyl Methacrylate system, which is a fast curing, UV stable system.  The system can be installed in temperatures as low as -20°F, and is a multi-color system, with colored quartz aggregate broadcast into the base coats.  Our base system is a standard, double broadcast, 60-80 mils ( nominal 1/8 inch ) thick.

The preparation recommended for this system is shotblasting.   This is a mechanical method of preparing the concrete to receive high performance epoxy systems.  This removes the laitance (the weak part of the concrete) and allows the epoxy to bond to the concrete.

Installation takes approximately one day, in most circumstances.  With this system you are able to use the floor an hour after the installation is complete. 

Series 50F Flake Floor

This is a Methyl Methacrylate system, which is a fast curing, UV stable system.  The system can be installed in temperatures as low as -20°F, and is a solid color system, with colored chip broadcast into the base coat.  Our base system is a standard, double broadcast, 110-125 mils ( nominal 1/8 inch ) thick.

The preparation recommended for this system is shotblasting.   This is a mechanical method of preparing the concrete to receive high performance epoxy systems.  This removes the laitance (the weak part of the concrete) and allows the epoxy to bond to the concrete.

Installation takes approximately one day, in most circumstances.  With this system you are able to use the floor an hour after the installation is complete. 

images/Color Cards/Macro Chip Color Chart.pdf

images/Color Cards/Micro Chip Color Chart.pdf