|
|
|
|
|
Rubber Block Flooring |
|
|
|
|
|
Interlocking
Rubber Block Flooring
INTERBLOCK ™ is a revolutionary
new concept in unit-type industrial and commercial flooring.
Manufactured from rubber products, each rubber
paver is molded uniformly into "dog bone" shaped that interlock
perfectly to create an attractive, durable and easy to install surface. Ecologically
sound and ergonomically correct, this resilient flooring feels comfortable to
stand on for long periods, and prevents fatigue caused by hard surfaces.
Shock absorbent and slip resistant, it is unaffected by fuel, cutting oils,
lubricants, and water.
Well suited for a variety of installations
indoors and out-of-doors, this versatile rubber flooring is permanent, but can
be moved , stored, and reused for lasing value. Because of the
"dog-bone" shape which interlocks, blocks remain in place, and can be
installed with or without adhesive.
|
|
Physical Characteristics
| Construction |
Molded from
recycled rubber products
Can not shrink,
buckle, warp, or crack
Can be cut with
a table saw |
| Dimensions |
Dog-bone
configuration
7
3/4" long x 6 1/4" wide at top/bottom
Two
thicknesses offered; 1 3/4" depth and 7/8" depth |
| Weight |
2.5
lbs each for 1 3/4" block
1.25
lbs each for 7/8" block |
| Coverage |
3.4 blocks per square
foot |
| Standard Colors |
Black
and Red
Custom
colors are based upon quantity |
| Recommended Adhesives |
Call for information. |
Technical Specifications
| Hardness |
80 Durometer Standard |
| Thermal Resistance |
R= 2.32 (ASTM C518-76) |
| Thermal Conductivity |
K= 0.75 (ASTM D257) |
| Thermal Stability |
-40° C to +90° C |
| Freeze/Thaw |
No Change (-40° C, 40
cycles) |
| Accelerated Weathering |
No Change (2,500
hours) |
| Electrical
Conductivity |
1.1 x 10.4 (Siemans/meter) |
| Tensile Strength |
2,000 psi minimum
(ASTM D412) |
| Compression Strength |
10,000 psi minimum |
| Compression Endurance |
10,000
cycles with 10 to load
No
deterioration |
| Abrasion Resistance |
0.3812 g loss (2,000
cycles Taber abrader 1kg) |
| Coefficient of
Friction |
0.64 dry, 0.79 wet
(ASTM D1894) |
|
Chemical
Resistance:
Fuel A
Oil 3
Lubricating Oil
Cutting Oil
Dilute HCL |
No
deterioration
No
deterioration
No
deterioration
No
deterioration
No
deterioration |
| Flash Point |
Between 650°
and 800° F* |
*Tested
and in compliance with Article 15, Part 1120 of the New York state Uniform Fire
Prevention and Building Code. Test results available upon request.
|
|
Numerous Applications:
In-Plant/Indoors
| Industrial Floors |
Foundries |
Laboratories |
| Assembly Areas |
Woodworking Shops |
Machine Shops |
| Weight Rooms |
Exercise Areas |
Behind Counters |
Out-of-doors
| High Traffic Areas |
Swimming Pools &
Decks |
| Recreation Areas |
Patios & Walk Ways |
| Wash Down Facilities |
Golf Courses |
We offer professional installation of this
product, or you can purchase this product and install it yourself.
|
|
|
|
|
| |
