|
For heavy duty resurfacing look to trowel-applied epoxy resurfacers. These
are three component mortar of; 100 % solids epoxy resin, catalyst, and special blended
aggregates. Most installations are applied at thickness' of 187 mils (3/16 inch)
to 250 mils (1/4 inch) thick, but can go as thick as needed. They are porous, and
need to have at least an epoxy coating applied as a top coat.
Some Typical Applications Include:
- Loading Docks
- Aisles
- Ramps
- Steel Wheel Cart Areas
We recommend for most situations that, preparation for our resurfacers are done
with Wheelaborator Blastrac Shotblast equipment.
|
