This system is unique to most epoxy coated garage floors.  The unique properties are the flexibility of the system.  The system is a epoxy floor coating with elastomeric properties. This is not a standard epoxy and, therefore is a custom system.  We can also add recycled car tires to the system to keep it flexible and, still give some texture.   Our systems are a standard 16 mils in thickness but, with a full broadcast of rubber can increase the thickness to 80-100 mils ( nominal 1/8 inch ) thick.  We also offer a thinner system at 40-60 mils ( nominal 1/16 inch ) thick.

The preparation recommended for this system is shotblasting.   This is a mechanical method of preparing the concrete to receive high performance epoxy systems.  This removes the laitance (the weak part of the concrete) and allows the epoxy to bond to the concrete.

Chemical resistant urethane (CRU), is a solvent based product that will not affect the texture greatly, but will enhance the chemical resistance, and UV stability.  This would be an additional top coat. The CRU comes in two finishes: glossy, and satin.